8/30/2023 0 Comments Iar 30 day trial![]() How To Build the IoT Lighting Control DMP Demoįor this demo, we used the same product kit SLWSTK6006A from our previous blog. DMP enables an elegant and effective solution. Without DMP, supporting BLE and Zigbee simultaneously in the lightbulb would require two radios and two protocol stacks running on two separate processors, increasing complexity and cost. ![]() In this blog, we delve a little deeper, building and testing the “switch/light” Silabs example, which demonstrates how IoT-connected lighting can be switched on and off by either a physical switch running Zigbee or by a BLE application on a smartphone. In a previous blog, we worked through a simple DMP range test precompiled demo that had two Zigbee devices communicating with each other over Zigbee and with a smartphone application over BLE. With DMP, a low-cost, low-power device can support both BLE and Zigbee simultaneously on the same chip and radio. ![]() In the past, we have developed software for Zigbee and Bluetooth Low Energy (BLE) devices and also worked with devices that combined Wi-Fi with either Zigbee or BLE, where Wi-Fi was used primarily as a gateway to the internet.īut we had never worked on a connected device that mixed BLE and Zigbee and have wanted for some time to test-drive Silicon Labs‘ (Silabs) dynamic multiprotocol (DMP) offer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |